| Technical Specifications. |
Lynx A453 230V. |
Lynx 03 24V |
| Power Supply Voltage (Vac) |
230 (+6 -10%) - 50/60
Hz |
| Power supply Centrale (Vac) |
Not applicable |
22 (+6-10%) -50/60 Hz |
| Absorbed Power (W) |
50 |
3 Maximum |
| Motor Load (W) |
500 |
80 |
| Maximum Accessories Load (mA) |
500 |
24 Vdc 500mA |
| Ambient Temperature ( °C) |
-20 °C +50 °C |
-20 °C +55 °C |
| Protection Fuses |
2 |
| Function Logic |
Automatic / 'stepped' |
Stepped automatic |
| Opening / Closing Time
(seconds) |
30 second fixed |
Through self learning during programming |
| Pause Time (seconds) |
Trimmer adjustable (2 to 90
sec.) |
Through self learning during programming |
| Thrust Force |
Trimmer adjustable |
2 levels selected by dip-switch |
| Thrust Time (seconds) |
1 second fixed |
Not applicable |
| Reversing Time (seconds) |
2 second fixed |
Not applicable |
| Slow-Down Time (seconds) |
1 second fixed |
Not applicable |
| Terminal Board Inputs |
Open / closing photocells / stop /
open and closing limit switch / mains power + earth / open-close separate
input |
22 Vac power supply/battery power
supply/start/CLOSE only input/stop/opening safety devices/closing safety
devices/opening limit switch/closing limit switch |
| Selectable Functions |
Not Applicable |
Electronic clutch/automatic closing/slow-down on
opening/limit-switch/condo function/START command/slow-down time/courtesy light
or indicator light/limit switch |
| Rapid Connector |
Genius 5 PIN
receiver |
| Sensor Connector |
Anti-crushing sensor |
Not applicable |
| Terminal Board Outputs |
24 vdc accessories power supply /
courtesy light / lamp / motor |
24Vdc accessories/24 Vdc motor / electric lock /
24 vdc lamp - courtesy light. |
| Transformer characteristics |
Not Applicable |
Primary 230 Vac, secondary 22 Vac/800VA |
| Optional battery
characteristics |
Not Applicable |
12V - 4Ah. Dimensions: 90 x 70 x 108mm |
| External Housing |
Not Applicable |
305 x 225 x 125mm. IP55 |
